# Crimson Guard Helmet build

**URL:** <https://forum.thefinestcc.com/t/crimson-guard-helmet-build/1353>\
**Category:** Costume Building\
**Tags:** costume-question, costume-build\
**Created:** [October 10, 2026, 2:23pm UTC](https://forum.thefinestcc.com/t/crimson-guard-helmet-build/1353 "2026-10-10T14:23:06Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![F-5577](https://forum.thefinestcc.com/user_avatar/forum.thefinestcc.com/f-5577/32/3367_2.png) [@F-5577](https://forum.thefinestcc.com/u/F-5577)\
**Post date:** [October 10, 2026, 2:23pm UTC](https://forum.thefinestcc.com/t/crimson-guard-helmet-build/1353/1 "2026-10-10T14:23:07Z")

</div>

My next part of my CG build has been the helmet. I ordered a four piece helmet from Villainous Props. The helm is sized to fit so it provides a good head to helm ratio as any proper military helmet should in my opinion.

> **[Crimson Guard Helmet (G.I. Joe)](https://villainouspropshop.com/product/crimson-guard-helmet/?srsltid=AU7gw4UMAcqrycrCIskn4-nLAmn4xvplXCOPcaPcZ-D6SZ0fIC_XEwbZOZE)**
>
> This a wearable raw 3D print of our interpretation of a Crimson Guard Helmet from G.I. Joe.  The helmet is printed in four pieces:
> 
> Helmet
> Mask And Sides
> Back Panel
> Emblem
> 
>  
> 
> Each helmet is printed in PLA and will require typical finishing...

I had a little trouble with the sanding for a smoother finish but after priming it’s taken to painting well. When assembled, the face plate is removable and held in place primarily by friction but I may end up adding magnets or micro latches for a more secure placement. Having a removable face plate maybe helpful for somethings.

I am debating on the color of the face plate though. I see most Siege uniforms have a silver face, such as the ones purchased from Pit Viper studios, ( [PV - Crimson Trooper 85 – Redman Studio Workshop](https://redmanstudioworkshop.com/products/pv-crimson-guard-1985) ) but most of the figures I find have a black face plate with the forward vent in silver. If you have an opinion on this I would love to hear about it before I begin working on the face plate itself.

---

<div class="post-metadata">

**Author:** ![RubenSandwich](https://forum.thefinestcc.com/letter_avatar_proxy/v4/letter/r/91b2a8/32.png) [@RubenSandwich](https://forum.thefinestcc.com/u/RubenSandwich)\
**Post date:** [October 12, 2026, 2:34am UTC](https://forum.thefinestcc.com/t/crimson-guard-helmet-build/1353/2 "2026-10-12T02:34:20Z")

</div>

I’m not sure what the right answer is, but my preference is silver/steel gray. Just my two cents.

---

<div class="post-metadata">

**Author:** ![F-5577](https://forum.thefinestcc.com/user_avatar/forum.thefinestcc.com/f-5577/32/3367_2.png) [@F-5577](https://forum.thefinestcc.com/u/F-5577)\
**Post date:** [October 27, 2026, 2:50am UTC](https://forum.thefinestcc.com/t/crimson-guard-helmet-build/1353/3 "2026-10-27T02:50:43Z")

</div>

After a few weeks of work I have finally finished the helmet. I went with the Black face plate and silver visor.

 ![1000001836](https://forum.thefinestcc.com/uploads/default/original/2X/9/9a6a808472be1e2dee12815633432b60f9177c4e.jpeg)

 ![1000001837](https://forum.thefinestcc.com/uploads/default/original/2X/2/28fc7024164620a82039773b5664a14b8206d14c.jpeg)

 ![1000001838](https://forum.thefinestcc.com/uploads/default/original/2X/c/cfa17e19ce25b290d21140576347b59d2f3a82e3.jpeg)

I based the make off of the CG Classified helmet as seen here.

 ![Classified Helmet 1](https://forum.thefinestcc.com/uploads/default/original/2X/8/8121641c7b1fe8eab6d54819640f2a391a33d926.png)

 ![Classified Helmet 2](https://forum.thefinestcc.com/uploads/default/original/2X/5/5cd8a2df24d66346aa236260bdddadf517d091c4.jpeg)

What do you think? I would love some feed back.
